Skip to content

kW and kWh: power and energy on a battery spec sheet

Last checked November 20, 2026

Kilowatts (kW) tell you how hard a battery can push. Kilowatt-hours (kWh) tell you how much it holds. A spec sheet lists both because a home needs both answers.

How the two figures relatekW: how much power at one momentMultiply by hours of usekWh: total energy used or stored
Power multiplied by time gives energy.

The pipe and the tank

One glossary uses a pipe picture. Power is the size of the pipe, meaning the most electricity you can push through at one time. Energy is the flow through the pipe over a period.1

That gives you a plain rule. The kW figure limits how many things you can run at once. The kWh figure limits how long you can run them.

What kW measures

Power is rated in kilowatts. It measures the most electricity an appliance requires at any instant.1 A kilowatt is 1,000 watts.2

On a battery sheet, the kW figure is the rate at which the battery can send power out. It needs to be at least as high as the combined draw of the things running together. The next pages explain how makers split this into continuous and peak power.

What kWh measures

The kilowatt-hour is a unit of energy. It equals the energy delivered by one kilowatt of power for one hour.2

Energy is power multiplied by time. Kilowatts times hours gives kilowatt-hours.1 Two examples from the encyclopedia entry show the idea:

  • A heater using 1,000 watts for one hour uses one kilowatt-hour.2
  • A television using 100 watts for 10 hours also uses one kilowatt-hour.2

Same energy, very different power. The heater is a hard push for a short time. The television is a gentle push for a long time.

A common mistake in writing

You may see "kW/h" in ads or forum posts. It's wrong. The entry says the notation kW/h for the kilowatt-hour is incorrect, as it denotes kilowatt per hour.2 If a sheet or a quote uses it, ask what the writer meant.

Why both numbers appear on a spec sheet

Two batteries can hold the same kWh and have different kW ratings. One can run a bigger load for less time. The other can run a smaller load for longer. Neither figure describes the other.

Here's a simple way to work with them. It doesn't need special tools.

  1. List the appliances you want to keep running in an outage.
  2. Look up each appliance's power in watts on its label or in its manual.
  3. Add the ones that would run at the same time. Compare that total with the battery's kW rating.
  4. Estimate how many hours each one runs. Multiply watts by hours to get watt-hours, and divide by 1,000 for kWh.2
  5. Compare the energy total with the battery's usable kWh, not its total. See usable versus total capacity.

The glossary gives a sample of how energy adds up. It says ten compact fluorescent bulbs at 15 watts each, on for six hours, use nearly 1 kilowatt-hour.1 The same page says a refrigerator and an LED TV each pull about 200 watts.1

Those are examples from one source, not figures for your own appliances. Your appliance labels and manuals give the real numbers.

Where the figures sit on the sheet

Look for kWh under a heading about capacity or energy, and kW under one about power or output. If a sheet shows only one of them, ask the maker or installer for the other before you compare.

Connecting a battery to a home's circuits, and checking that its ratings suit the home, is work for a licensed electrician.

Reference list

  1. Speak storage fluently with these key terms, EnergySage
  2. Kilowatt-hour, Wikipedia