Usable versus total capacity: why the two kWh figures differ
A spec sheet often lists two capacity numbers, both in kilowatt-hours (kWh). Total capacity is the bigger one. Usable capacity is the one that matters when you ask how much energy you can actually pull out.
What each figure means
Total capacity, sometimes called total energy, is how much electricity the battery holds when it's full. One glossary describes it as the electricity that would be available if you could discharge the battery all the way to zero.1
Usable capacity is the part you can draw for your home. The same glossary describes it as the electricity stored in the battery that is available for consumption.1
If the sheet gives only one kWh number, check which of the two it is. Read the footnotes and the table heading before you assume.
Why the two numbers differ
There are two reasons in the sources used here.
- The battery needs some power to keep itself running. The glossary says batteries have their own native load requirements, so not all the stored electricity is available to you.1
- The battery's controls can stop it from reaching the extremes. A battery management system or charger may keep the battery away from extreme levels of charge.2
Depth of discharge is a separate figure on the sheet, covered on the depth of discharge page.
Why you shouldn't plan around the total
Say a sheet lists a large total figure and a smaller usable figure. Only the smaller one counts. Planning with the total would overstate how long the battery can run your lights, your fridge and your router through an outage. Don't do it.
The glossary also warns about going past the usable figure. Trying to use more than the usable energy may have detrimental impacts on the health and longevity of the battery.1 Follow your product's manual for how it behaves near empty.
A quick way to check a spec sheet
- Find the line that says "usable" (or "usable energy"). Note the kWh figure.
- Find the total, nominal or rated figure. Note it separately.
- Look for the depth of discharge percentage. It is related to usable capacity, but the usable figure can include other limits.
- Read any footnote. It may say the figure applies to one temperature, one discharge rate or one battery module only.
- Use the usable figure when you compare batteries, and make sure both sheets use the same meaning.
The last step needs care. Depth of discharge is used in more than one way. Its exact meaning should be clear for a given context.2 The same holds for capacity words. If two sheets use a word differently, the numbers aren't a fair match.
What usable capacity doesn't tell you
Usable capacity says how much energy is stored, not how fast it can come out. Speed is a power rating, in kilowatts, and it sits on a different line. See kW and kWh for the difference.
It also says nothing about losses on the way in and out. Those show up as round-trip efficiency.
Sizing a backup system for a real home, and connecting it, is work for a licensed electrician. This page only helps you read the numbers.
Reference list
- Speak storage fluently with these key terms, EnergySage
- Depth of discharge, Wikipedia