Skip to content

Surge loads and motor starting current

Last checked November 20, 2026

Some appliances draw far more electricity for a moment when they switch on than they do while running. A battery has to cover that moment, and its continuous rating alone doesn't show whether it can.

What happens when a motor startsMotor is switched onStart-up draw spikes brieflyMotor picks up speedDraw settles to running level
The starting draw falls once the motor is moving.

What the spike is

The effect has a few names: inrush current, input surge current and switch-on surge. It's the maximal instantaneous input current an electrical device draws when it's first turned on.1

Motors are the usual cause in a home. Such a motor, the reference says, may draw several times its normal full-load current at the first moment. The surge lasts for a few cycles of the input waveform.1

Why does a motor do this? The reference explains that an AC induction motor behaves like a transformer with a shorted secondary until the rotor begins to move.1 In plain words, a motor that isn't turning yet looks like an easy path for current. Once it spins, it pushes back and the draw drops.

A running figure and a starting figure

Take a refrigerator. One glossary puts a refrigerator at about 200 watts of power, the same as an LED TV.2 That's a typical running figure from one source, not a rule for every fridge.

A motor-driven appliance can ask for more than its running figure for a short moment at start. The running figure tells you about energy over hours. The starting figure tells you whether the battery's peak rating is high enough on the first second.

A sump pump gets the same treatment in the glossary. The power requirement of a sump pump, for one, spikes when you turn it on. For the battery to power them, you need one that can push out a large quantity of power over a short period.2

How long the spike lasts

The sources here don't give one number, because it depends on the device. The reference says the spike lasts for a few cycles for motors and transformers.1 It also says the duration of the starting transient is less if the mechanical load on the motor is relieved until it has picked up speed.1

So the same motor can have a shorter or longer start depending on the load it faces.

Where to find the starting figure

The figure isn't always printed in plain view. Try these places in order.

  1. The appliance's rating plate, usually a sticker on the back, side or inside the door.
  2. The appliance's manual or the maker's support pages. Look for "starting," "locked rotor," "surge" or "inrush."
  3. The maker's customer support, if the first two don't list it.
  4. A licensed electrician, who can measure it with the right instruments.

Some plates list only a running rating. If a starting figure isn't printed, don't guess from a similar appliance. Ask, or leave a wide margin.

Matching it to the battery

Once you have a starting figure, compare it with the battery's peak rating. Then check how long the peak can last, as covered on continuous versus peak power.

Two loads starting at the same moment add together. Check whether the system can stagger them. Your battery's manual says how it handles loads that start together.

What this page doesn't cover

Sizing, wiring and protection for motor loads on a home's circuits belong to a licensed electrician. Don't connect a battery to a pump, a fridge or a switchboard yourself, and don't plug a battery into a wall outlet to power the house. Follow your product's manual.

Reference list

  1. Inrush current, Wikipedia
  2. Speak storage fluently with these key terms, EnergySage