Cycle life ratings and what counts as a cycle
A cycle life figure is a count of charge and discharge rounds. It's only useful with its conditions. Ask how deep each round was, what the test counted as the end, and what conditions it ran under.
What counts as one cycle
Many people read a cycle as a full discharge of a charged battery followed by a recharge. Battery University says that's the common understanding, but it's not always the case.1
It adds that there is no standard definition of what a discharge cycle is.1 One example it gives is a smart battery that may require a 15 percent discharge after charge to qualify as a cycle, and anything less isn't counted.1
So two makers can count differently. The first step is to find how the sheet's footnote defines a cycle.
The depth link
The laboratory definition ties the two ideas together: the cycle life of a storage system is a function of depth of discharge.2 A cycle count at one depth can't be compared with a count at another.
Battery University says manufacturers often specify cycle life at an 80 percent depth of discharge.3 It also says a partial discharge reduces stress and prolongs battery life, and so does a partial charge.3 That's why the depth matters. See depth of discharge for what the percentage means.
What does "6,000 cycles" tell you?
Taken alone, not much. It leaves several questions open.
- How deep was each cycle? The sheet should give a depth of discharge.
- Where does the count end? A sheet should say what remaining capacity ends the count. The sources saved for this page don't say what level makers use, so read the footnote.
- What temperature and charge rate applied?
- Was it a lab test or field data?
On that last point, Battery University warns that lab results can be out of reach in real use.3
Ranges for context
For one common chemistry, lithium iron phosphate, an encyclopedia entry gives a cycle life from 2,500 to more than 9,000 cycles, depending on conditions.4 The wide range shows why one headline figure can't stand alone. It isn't a figure for any one product.
Reading the sheet, step by step
- Find the cycle count.
- Find the depth of discharge it was measured at.
- Find the remaining capacity at which the count ends, often in a footnote or the warranty text.
- Find the temperature, charge rate and discharge rate.
- Check how the sheet defines one cycle.
- Compare with another sheet only if the depth, end-point and conditions match.
Cycles and the warranty
A cycle count on a spec sheet isn't the same as a warranty term. The warranty has its own conditions. Read the warranty document itself, and follow the maker's own terms.
Who to ask
If a sheet leaves out the conditions above, ask the maker or the installer in writing. A licensed electrician or the maker's approved installer handles anything involving the battery's connection to the home. Don't open or modify a battery.
Reference list
- BU-501 Basics about Discharging, Battery University
- Energy Storage Subsystems and Definitions, Pacific Northwest National Laboratory
- BU-808 How to Prolong Lithium-based Batteries, Battery University
- Lithium iron phosphate battery, Wikipedia